Bring one of the most iconic Pokémon to life with this Cubone kit card!
This model prints flat and transforms into a fully assembled 80mm display figurine of Cubone that can stand on its own. Simply print, pop the pieces out, and assemble.
Features:
- Compact, print-in-place style kit card
- Cleanly separated parts for easy removal
- Designed for FDM 3D printing
- Beginner-friendly assembly
- Accurate proportions inspired by the classic Pokémon design
Printing Notes:
- This kit card requires an AMS.
- Let the print bed cool completely before removing the print. Removing early may warp the piece.
- While it may be possible to print a smaller or larger version, tolerances have not been tested for other sizes, so print at your own risk!
Assembly Notes:
- There are a grand total of 15 pieces. The small connector bits are throwaways.
- Make sure the bone is inserted as deep as it can be. It is important for the balance of the final figurine.
- For the most pieces, the bed-contacting faces should be looking in (refer to the GIF).
- GIF below should explain any additional assembly necessary. If something is not clear feel free to ask.
Kadis EDR
