House in Bonsai roots - RGB Lamp

⛩️ House in Bonsai roots ⛩️

💡 Concept

This project is my interpretation of the harmony between nature and daily life. I wanted to demonstrate that architecture don't have to exclude nature, they can exist together.

Main theme is a bonsai tree growing directry from the foundation of a small house, embracing it with its roots and vines. It serves as a symbol of symbiosis: the house provides the tree with a foundation, while the tree gives the house life and shelter.

🔨 Assembly Guide

#1 Place the RGB LED in the hole.

#2 Fit your RGB LED into the dedicated pocket under the base

NOTICE! 

If you notice a defect visible in photo below, just cut if off gently.

#3 Snap the front door into the wall marked with number 1

#4 Insert walls

NOTICE! 

Walls are numbered! You can find same numbers on the base, match them!

Wall #1                                                                                    Wall #2

Wall #3                                                                                  Wall #4

#5 Install the roof

NOTICE! 

The little cube have to be pointed to the front!

#6 Put roots on the roof

NOTICE! 

Look for the side with a single hole, that's the front! The other sides have 2 holes each.

#7 Place the Bonsai trunk

NOTICE! 

You can use a small amount of glue inside the trunk's hole for a more secure fit.

#8 Place leaves

#9 Add butterflies 

Enjoy your House in Bonsai roots!