Tokyo Ghoul Scolopendra Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 101.25x180mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #ffffff PLA+ Sunlu White  Transmission Distance: 5
    #1c1c1c PLA PolyTerra Charcoal Black  Transmission Distance: 0.3
    #d22332 PLA+ Sunlu Red  Transmission Distance: 6
    #e2dedb PLA PolyLite White  Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to White
    At layer #15 (1.28mm) swap to Charcoal Black
    At layer #19 (1.6mm) swap to Red
    At layer #24 (2mm) swap to White for the rest.