Touka Kirishima Tokyo Ghoul Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 127.09x180mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.48mm and the Actual Thickness is 2.24mm

    #1c1c1c PLA PolyTerra Charcoal Black  Transmission Distance: 0.3
    #536c8b PLA esun grey blue  Transmission Distance: 3.2
    #d22332 PLA+ Sunlu Red  Transmission Distance: 6
    #ffffff PLA+ Sunlu White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Charcoal Black
    At layer #8 (0.72mm) swap to grey blue
    At layer #12 (1.04mm) swap to Red
    At layer #17 (1.44mm) swap to White for the rest.