Miku Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 136.11x180mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm

    #000000 PLA+ Sunlu Black  Transmission Distance: 0.6
    #536c8b PLA esun grey blue  Transmission Distance: 3.2
    #9b9ea0 PLA BambuLab Matte Ash Gray  Transmission Distance: 1.5
    #d22332 PLA+ Sunlu Red  Transmission Distance: 6
    #ffbac3 PLA+ Sunlu sakura  Transmission Distance: 6
    #01b3ff PLA+ Sunlu Sky Blue  Transmission Distance: 4
    #fdcc1a PLA+ sunlu vivid yellow  Transmission Distance: 2.6
    #ffffff PLA+ Sunlu White  Transmission Distance: 5
This print uses 8 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to grey blue
    At layer #10 (0.88mm) swap to Ash Gray
    At layer #13 (1.12mm) swap to Red
    At layer #14 (1.2mm) swap to sakura
    At layer #16 (1.36mm) swap to Sky Blue
    At layer #19 (1.6mm) swap to vivid yellow
    At layer #20 (1.68mm) swap to White for the rest.