Mosquito MK1 Airsoft 14MM CCW Barrel Adapter

After printing the parts for the Hybrid Armory Mosquito MK1 airsoft kit, I was disappointed that the outer barrel did not have the standard 14 MM CCW(Left Hand) threads that fit a majority of airsoft muzzle devices. This adapter allows the use of any 14 mm CCW muzzle device such as mock suppressors, flash hiders, and tracer units. 

In the pictures you can see that my Acetech Brighter R fits on the barrel. This also allows standard muzzle devices while using inner barrels that are longer than whatever outer barrel you are using. 

This adapter adds around 35 MM to the end of the barrel.

Using the provided profile, the part is strong even when printed out of PLA. The support settings in the profile will remove easily and leave very little, if any, support scarring on the inside of the adapter. Infill type and density does not matter as the wall count prints as solid.

Printed in SUNLU PLA+ 2.0 on a BIQU Cryopgrip Frostbite Plate. 

PLEASE PRINT SLOWLY. USE 50 % SPEED SETTING. THIS WILL MAKE THE THREADS CLEANER