Psalm 23:1 Bible Verse 50mm by 150mm Bookmark

Add a touch of peace and inspiration to your reading with this Psalm 23:1 bookmark. Featuring a serene shepherd scene in warm, elegant tones, this design captures the comfort and strength of one of the most beloved verses.

Perfect for 3D printing, the model is clean, easy to print, and sized for everyday use. A thoughtful gift for church groups, loved ones, or anyone seeking a reminder of faith and guidance.

“The LORD is my shepherd; I shall not want.” – Psalm 23:1

Project: Psalm 23.1 6C.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 50.04x150.03mm in size

You may print at higher layer heights below the Base Thickness of 0.24mm
The Max allowed Thickness is 1.92mm and the Actual Thickness is 1.92mm

    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #7d6556 PLA BambuLab Matte Dark Brown  Transmission Distance: 2
    #304301 PLA BambuLab Matte Pine Green  Transmission Distance: 1
    #f99963 PLA BambuLab Matte Mandarin Orange  Transmission Distance: 3
    #ffe17f PLA BambuLab Matte Lemon Yellow  Transmission Distance: 4
    #ffffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.5
This print uses 6 unique filaments

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to Dark Brown
    At layer #9 (0.8mm) swap to Pine Green
    At layer #10 (0.88mm) swap to Mandarin Orange
    At layer #13 (1.12mm) swap to Lemon Yellow
    At layer #16 (1.36mm) swap to Ivory White for the rest.