X2D/P2S Screen Cover with Smartphone Camera-Mount

Overview

A dedicated module for the Bambu Lab P2S, X2D, H2 Series that combines a smartphone mount with a protective panel cover. It leverages the  printer monitor's native tilt function, allowing you to achieve the perfect camera angle instantly without any extra gear.

Why this model?

• Instant Setup: The integrated design means you’re always ready. Just flip the cover, set your phone, and start recording. No more fumbling with external tripods.
• Full Use of Native Tilt: Utilize the printer monitor's original range of motion. Simply tilt the monitor itself to perfectly frame your shot.
• Physical Panel Protection: When not in use, the cover shields your LCD screen from dust, debris, and accidental impacts.
• Secure Click-Lock: The cover features a reliable locking mechanism that stays shut with a satisfying "click." The hinge uses a standard 1.75mm filament as the axis.

Quick Guide

1. Hinge Assembly: Align the hinge holes of the cover and the mount, then slide a 1.75mm filament through to create the axis.
2. Installation: Push the mount onto the printer control panel frame until it is flush with the bezel.
3. Angle Adjustment: Tilt the monitor itself to optimize the camera's field of view.
4. Usage: Flip the cover open to mount your smartphone. When finished, close it until it "clicks" to protect the panel.

Print Notes & Handling

• ⚠️ Glass Door Interference: When the cover is flipped open (recording mode), it will interfere with the printer's glass door. Always close the cover or remove your smartphone before opening and closing the door.
• Disclaimer: The designer is not responsible for any dropped smartphones, damage to devices, or impact on the printer resulting from the use of this model. Use at your own risk.