Extended desk drawer with multi storage

Boost MeBoost are very appriciated, it help to cover cost on future projects. Thank you

This is my new version of the Drawer with multi storage.

 

This model is now, longer, taller, and soon comes with accesories such as a gridfinity base.

 

The inside box measurements are:  371mm (L) x 115,5mm (H) x 198mm (w)

 

The outside measurements are: 375mm (L) x 120,25mm (H) x 248mm (included rails) (w)

 

Things you need:

 

GLUE! to glue it all togeather (make sure to take your time gluing the pieces togeather to achive the best result)

 

6-8 screws to mount up into your table. (holes are Ø6 counter sunk)

 

I really hope you guys will love this design.

 

Glue Guide

 

Step 1.

3 connectors in the bottom of the box (make sure you dont use the ones for the side, they have a small edge)

Step. 2

Only Glue this area on the side connectors

Step 3.

Make sure to click in the side connector properly, until they are flush on the inside of the box.

Step. 4

Hold it firm until they dry.

Step. 5

Glue the 3 pins in to the handle, and apply some glue on the area around the pins.

Step. 6

Put alittle glue on the holes on the box, before attaching the handle. Hold it firm until it dry.

Step 7.

Assembly the slide rails, using the 4 small pins. Glue them into one side. (BE SURE YOU ORIENTATE THE RAILS CORRECT)

Step 8.

Put some glue on the surfaces that need to combine,

Step 9.

Connector and hold them firm until they dry.

Step 10. 

This is how its suppose to look, after this you are ready to install the box. its a good idea to try hold the rails onto the box so you know how the rails fit before you try install them (make sure you start with the correct rail, then after that hold the box into the rail, and attach the last rail.)