This model is my attempt at modeling the Pixel Sniper weapon skin from Roblox Rivals. My son wanted a real life version of it and I've designed this based on screenshots from the game.
The full scale of the weapon is 60 cm in length once fully assembled or about two feet.
Print all part then for assembly:
Press fit the two main body parts together. Add a bit of CA glue if needed.
Then press fit the 2 parts of the barrel together. Add a bit of CA glue if needed.
Slide the assembled barrel in the body. Add a bit of CA glue here as well if needed.
Then press fit the pads for the stock and cheek guard
The magazine should just press fit in. You should be able to slide it in and out and should stay in place simply with friction.
Press fit the fake screws inside the body. Note that on one side of the body, there is supports to remove before the screws can be inserted. I do this with a small flat head screwdriver.
When inserting the screws, insert the rounded off part head first like so:
Then press fit the buttons on the scope - they should just press fit in place and twist with a bit of friction (glue them if needed).
And lastly press fit the scope on top of the model.
Boost MeThank you very much if you are considering boosting this model :)
Thibault01
