Dust Cover Compatible with FCI ATD-Pl2F Detectors

Protective Dust Cover for Smoke and Heat Detectors

REMOVE BEFORE OCCUPANCY

This is a protective cover designed for smoke and heat detectors. These covers are intended for use during construction, renovation, or maintenance to prevent dust, paint overspray, and debris from contaminating sensitive detection Chambers or triggering false alarms.

In many jurisdictions, the use of detector covers is strictly regulated. Ensure that all local fire codes are followed and that the covers are removed as soon as the hazard of contamination has passed or when the building is occupied.

Technical Specifications

• Function: Temporary environmental shield for fire detection hardware.
• Compatibility: Designed to fit standard circular smoke and heat detector housings.
• Material: Compatible with ASA, PETG, PLA+, etc.
• Design:  Rim-clamping depending on specific detector geometry.
• Removal: Twist to remove

Print Settings

• Profile: 0.20mm Standard @BBL XLC
• Supports: Not required 
• Infill: 10-15%
• Wall Loops: 2-3

REMOVE BEFORE OCCUPANCY