Description
This model is a remix of the original Xshot Fury X Reshell by @JaneDoe_2072041. I modified the design to work with the smaller build plate and moving print bed of the A1 Mini, fine‑tuned the print profile, and added a custom mag that uses the stock Xshot box‑mag spring - meaning no extra springs or aftermarket magazines are required unless you want them.
About the Original Design
The base model is an Xshot Fury X Reshell that transforms the platform from its bullpup talon configuration into a mag‑in‑grip blaster supporting 31k, Nightingale, and Mini Angled Talon‑style magazines.
The original fileset includes a 10‑dart magazine (shorter mags are not compatible).
Magazine Compatibility
Best Compatibility
- Standard 31k mags (primary design target)
- Included 31k‑pattern mag in the profile (The mag from JaneDoe_2072041, which requires a coil spring, and a custom one that uses the XShot spring and requires no extra hardware)
Works With Tweaks / Optional Files
- Nightingale / Mini Angled Talon mags with the 31k cut
- Feeds, but may pull off the pusher’s rubber ring
- Venom / Dartzone mags with 31k cut
Untested
- RedCowl Compound mags
- Vesper mags (future release)
Not Compatible
- Diana mags with wide grip base
- 31k “horizontal print” mags (dimensionally different)
Required Hardware
- 3 × M3 nuts
- 3 × M3×25 bolts
- Superglue
- Lube
- (Optional) Replacement pusher O‑ring
- Xshot Longshot O‑ring recommended (14 mm OD / 10 mm ID / 2 mm tube diameter)
Additional Notes
- Build Guide:
See the PDF assembly guide included below. - For longer barrels, use the “Red Cowl Collet” version and swap the parts as listed.
- 31k File Repository:
https://drive.google.com/drive/u/0/folders/1E0PVRUimsXT9qqWXhqq85TYIZZVnGRC2 - RedCowl Low‑Profile Collet:
https://www.printables.com/model/812491-low-profile-collet-for-redcowl-collet-system
Update Log (Original Project)
- v1.01 – Grip panel mesh fix (@FIB_170804)
- v1.02 – Optional “Magazine Stop”
- v1.03 – Adjusted Rear Frame fit
- v1.04 – Mesh fixes for Rear Frame / Front Frame / Trigger Guard
- v1.05 – Feeding improvements with replacement O‑ring
- v1.06 – Improved Dart Guide for Nightingale mags (@JOP_3764735)
Mouse House
