Milwaukee Packout energy drink/soda can holder

Milwaukee Packout Can Holder – The Accessory You Didn’t Know You Needed

I’ve designed a piece of equipment for Milwaukee Packout that you didn’t know you were missing (and probably still don’t 😉)!

This is a Packout-mounted holder for energy drink or soda cans.
Now you can securely attach your favorite drink right on top of your Packout setup.

While designing this, I discovered that cans can vary quite a bit in diameter—not only between brands, but also depending on temperature. Because of this, I ended up with a design that features an open slot in the base and flexible tabs that press against the sides of the can. This ensures a secure grip across different can sizes.

The holder can be mounted directly onto your Packout system to keep your drink in place, or combined with my swing system to help prevent spills when opening the top toolbox.

It can also be used together with my Packout Puck design, allowing you to mount your cans on a wall or similar surfaces.

Print Information

• Print time: ~1 hour 50 minutes
• Filament usage: ~39g

Print Settings

• Layer height: 0.2 mm
• Walls/perimeters: 4
• Infill: 15%
• Brim width: 3 mm
• Brim-object gap: 0 mm

Safety

This mount is designed specifically for holding energy drink or soda cans on a Milwaukee Packout system and should not be used for other purposes.

Feedback

I’m always open to feedback on how this design can be improved!