removable licence plate holder 50ccm

Removable License Plate Holder for 50cc Mopeds – Magnetic Quick-Release System

This license plate holder was specifically designed for 50cc mopeds, scooters, and mopeds, and is compatible with a wide range of classic and modern vehicles such as Vespa, Simson, Kreidler, and similar models.

 

It features a removable design and consists of two main parts as well as two spacers, which together create a stable yet easily detachable construction. The holder can also be mounted as an add-on to most existing license plate holders.

 

The system is held together by a total of 8 integrated magnets (4 in each main part). These ensure a secure hold during riding while allowing the license plate to be removed quickly and without any tools.

 

The spacers snap precisely into the corresponding part, ensuring that the license plate stays firmly in place. To remove it, simply lift the holder slightly forward and then pull it upwards.

 

Key Features:

• Removable license plate holder with magnetic locking system
• Secure hold with 8 strong magnets
• Snap-in spacers for reliable plate fixation
• Tool-free removal in seconds
• Can be mounted as an add-on to existing plate holders
• Multiple file versions available for different configurations

 

Boost MeWant to support me? You can boost this project for free :D

Required Components:

• 8× magnets (8×3 mm or 8×2.5 mm)
• 4× M4 washers
• 2× M4 nuts
• 2× M4×5 socket head screws
• 2× M4×12 socket head screws
• 4× M4 heat-set inserts
  (outer diameter: 6 mm, height: 4 mm)

If you need the materials for the installation, feel free to send me a direct message. They are available for purchase for a small fee. Shipping is only within Germany.

 

Recommended Material:
PETG or comparable materials
(more heat-resistant and dimensionally stable than PLA, especially for outdoor use).