Print-In-Place Fidget Clicker

Dimensions: 

25x42x9.5mm (WxHxD)

just enough to fit in your pocket or on your keys (key ring hole ready)

Printing

Here you have pre-prepared and tested g-code for printing. Thanks to more separated parts, the printing time is 1h 23m, but only less than 9g of filament is used for that. There is also a .3mf and .stl files available here. Be careful to place the model correctly on the print bed.

Material: PLA or PETG (preferably PETG for outdoor use)

Layer: 0.15mm

Infill: min 30%

Supports/Brims: NO

Boost Meif you want more things like this