Firefly Clock Face

For your printing pleasure is my custom design for a Firefly clock face. Please note that this is just the face. cP3D has made an excellent back, so rather than reinvent the wheel I sized this face to fit his back. You can find it here:

Colored back for the 170 and 245 mm dials - Free 3D Print Model - MakerWorld

This is a 245mm model.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PLA BambuLab Matte Sky Blue Transmission Distance: 1.3
PLA BambuLab Basic Black  Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray  Transmission Distance: 3
PLA BambuLab Basic Pumpkin Orange  Transmission Distance: 5.5
PLA BambuLab Basic Gold 10401  Transmission Distance: 3.5
PLA BambuLab Basic Beige  Transmission Distance: 8
PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 7 unique filaments

If you want a different color for the numbers, change the Matte Sky Blue for whatever color you want the number to be.

Swap Instructions:
    Start with Matte Sky Blue (Or whatever color you want for the numbers)

    At layer #5 (0.48mm) swap to Black
    At layer #14 (1.2mm) swap to Blue Gray
    At layer #16 (1.36mm) swap to Pumpkin Orange
    At layer #19 (1.6mm) swap to Gold 10401
    At layer #24 (2.0mm) swap to Beige
    At layer #28 (2.32mm) swap to Jade White for the rest.

For a single AMS, load Matte Sky Blue, Black, Blue Gray, and Pumpkin Orange in slots 1-4 respectively. Between layers 16 and 19 when the Pumpkin Orange is being printed swap Gold, Beige, and Jade White into slots 1-3 respectively.