Kanto Starters Collection - Pokemon - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 170x170mm in size

 

    PLA BambuLab Basic Black
    PLA+ Sunlu Grey  
    PLA BambuLab Basic Gold
    PLA BambuLab Basic Jade White 
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Grey
    At layer #13 (1.12mm) swap to Gold
    At layer #17 (1.44mm) swap to Jade White for the rest.

 

Check out my other Pokémon-themed projects here!

 

For those who don't have an AMS or only have one, and the project uses more than four colors, you just need to replace the color changes with pauses and switch the filament manually.

 

If you wish to enlarge this project, you can freely scale the X and Y axes. However, it is crucial to keep the Z height at 100% (do not change it). This ensures that the filament color swaps remain at the correct layers; changing the height will break the color sequence and ruin the final result.

 

 

Boost MeFor you it's free, for me it's a lot