Biqu Frostbite QR Clip For P2S / X2D

This strip allows P2S/X2D to recognize the Biqu Frostbite Plate
as a Cool Plate or Smooth Plate.

The Frostbite Plate does not have mounting holes, and since the plate itself has some friction,

there were no major issues securing it with a simple snap mechanism.

I designed the mounting pins with ample clearance to compensate for thickness variations caused by coating deviations during the manufacturing process.

Based on the plate thickness, it can accommodate thickness variations ranging from 0mm to 1.5mm.

Since the Frostbite Plate is designed to be used exclusively with PLA and PETG,

you should be able to use it without any issues even if you print with PETG.

I do not recommend printing with PLA.

I hope this helps with your printing life.

------------------------------------------------------------------------------------------------------------------------------
please also check my other QR strip for the P2S / X2D !

QR Clip For P2S / X2D Build Plate_with Fix Pin

QR Clip For P2S / X2D Build Plate