Gandalf staff

 Disclaimer

This is a fan-made artistic interpretation inspired by J.R.R. Tolkien’s The Lord of the Rings.
It is not affiliated with or endorsed by Middle-earth Enterprises, Warner Bros., or any official rights holder. Assembly Instructions

 Assembly Instructions

1. Dry-fit everything first.
   You may need minor adjustments, especially where parts connect to the head of the staff due to print orientation on the P1S.
2. Sand the staff’s head carefully.
   Be careful where the cuts are — sanding too much can create larger gaps.
   It’s not irreparable, but it can make finishing longer and trickier, so take your time.
3. Glue all parts together, then sand everything as desired.
4. Finish: Apply primer, paint, and a matte varnish.
   • I personally used The Army Painter primer and varnish with good results.

 Electronics

This staff is made to be able to have a led wired to the top. I don't really know how to explain it so if you know how wiring works then you'll know what to do. If not put the following into chat GPT and let it explain it to ya: Battery+Connector - 6 pin push button - 500m resistor - LED Diode light - battery+connector. 

sorry if its confusing if it helps you feel any better I just started learning how to wire yesterday.

Here are the parts I used in my staff

Antrader 30 Pcs Micro Push Button Switch, 6 Pin DPDT Self-Locking Power On/Off Latching Switches 8 x 8mm: Amazon.com: Industrial & Scientific

LED

EEEEE 420pcs 6 Colors 5mm LED Diode Assortment LED Light Kit Box Multi Colored mini LEDs White Red Yellow Orange Green Blue Light Emitting lamp diodes Components Parts ledlights Circuit: Amazon.com: Industrial & Scientific

Wiring

26 awg Wire,26 awg PVC Electrical Wire -SCHDRA UL1007 26Gauge Tinned Copper Wires(6 Colors 20ft Each Color)(OD: 1.3mm),Stranded Wire-for Electronics, DIY Projects, Automotive Wiring.: Amazon.com: Tools & Home Improvement

 9 volt Battery Connector

Amazon.com: 9V Battery Connector,10 PCS T-Type 9 Volt Buckle Connector Hard Plastic Shell Used in Student Experiment,or Other Equipment with Battery : Electronics

 or if you chose to use a D battery instead…

D battery connector

Amazon.com: SDTC Tech 2-Pack 1 Slot D Cell Battery Holder 1.5V D Size Battery Case Box with Wire Leads : Electronics

Resistor

BOJACK 50 Values 1350 Pcs Resistor Kit 0 Ohm-5.6M Ohm with 1% 1/4W Metal Film Resistors Assortment: Amazon.com: Industrial & Scientific

These are all the cheapest items I could find and they all worked perfectly! 

I hope you love this model if so please feel free to boost!