Axial SCX10 Pro Micro Servo Winch Remote Mount

This is a remote micro servo winch mount for the Axial SCX10 Pro that mounts to the chassis rail behind the front wheels, leaving the front of the chassis open for a battery or CMS steering servo. It mounts to the chassis using the existing two holes for the transmission plus one additional 3mm hole that needs to be drilled in the chassis rail. It has been confirmed to fit the stock Pro chassis as well as the IERC pro chassis. 

The fairlead bolts in to the stock Pro front bumper and a piece of PTFE tube is used as a cable guide between the servo mount and the fairlead. You'll need to fish the winch cable through the servo mount, tube, and fairlead before attaching it to the winch spool.

Required hardware:

1. 1x m3x8mm screw
2. 1x m3 nut
3. 4x m2x6mm screws
4. 4x m2 nuts
5. short piece of 4mm OD ptfe tube

You can reuse the two screws for the transmission as well as the two screws from the stock fairlead. 

The print profile includes options for mounting the winch to either the left or right rail.

EDIT: I added a second print profile that has mounting holes for micro servos (like the NSDRC RS100) that only have one hole per side.