March 28, 2026
Description
The second iteration on a bonsai-inspired MagSafe stand that brings minimal style and elegance to your desk or night stand. Looking good even without a phone attached. A single charger Bonsai Tree is available here: https://makerworld.com/de/models/2542586
This version has a second compartment for a MagSafe charger hidden in the plant pot. The elegant zen line topper lead the way to a nice resting place for your Airpods.
The charger should fit all phone sizes in portrait and landscape orientation.
The MagSafe puck is being held in place by press fitting it into the holder. The cable routes neatly through the stem and exits at the bottom where a cable management leads it out the back.
This model currently fits the latest Apple MagSafe charger with a braided cable and 25W output. I plan on releasing different profiles for other charging pucks. Let me know what you need.
| Height | 22 cm |
| Width | 22cm |
| Depth | 16cm |
(Values are based on the test print shown in the images)
Print Time
Estimated Print Time | Value |
| Tree | 5h20m |
| Pot | 6h22m |
| Leaves | 2h19m |
| Soil | 1h55m |
| Total | 18h30m |
4 plates total |
Material Used
Parameter | Value |
| Filament Consumption | 411 g |
| Material Type | PLA |
Printing Parameters
Parameter | Value |
| Printer | P2S w/ AMS 2 Pro |
| Layer Height | 0.16 - 0.20 mm |
| Nozzle | 0.4 mm |
| Infill | varies |
| Supports | where needed |
If you enjoy this model, please consider supporting my work by leaving a like, rating the model, or sharing your make photos.
Thank you and happy printing!
License:
Standard Digital File License
AdrianS
