Holman Hose Reel Guides & Assemblies

Holman 30m hose reel guide & other parts.

I've got 2x of these 30m Holman hose reels, but only one of them broke so I tried modelling this off the unbroken one (v1) but it turns out that my 2nd unit is a slightly different model purchased about 18months later - so thats why theres 2x versions in this print.
I'm expecting these parts will also fit the other length reels from Holman.

I printed in ABS & it seems to work well. If the UV deteriorates it too much then my next attempt would be in ASA.
I really only needed to print the hose guide with the rollers, but thought I'd at least model the other parts I needed to pull out before they break later on.
As you can see in the photos, the original broken part in white - but I didnt take actual photos of the printed parts before fitting them. Its now been in use for a couple of months & is holding up well.
Use a set of pliers to rotate the rollers on the main guide, then work some of the additional material out for a smooth roller.