Demon Slayer Rengoku Hueforge

 You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA+ Sunlu Black Transmission Distance: 0.6
    PLA+ Sunlu Grey Transmission Distance: 2
    PLA+ Esun Bone White Transmission Distance: 5
    PLA+ Sunlu Red Transmission Distance: 6
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Grey
    At layer #15 (1.28mm) swap to Bone White
    At layer #22 (1.84mm) swap to Red for the rest.