💡 設計概述
這不只是一個寵物窩，更是客廳裡的幾何藝術品！本作品利用經典的足球幾何結構（截角二十面體變體），在維持極高結構強度的同時，實現了極致輕量化，為您的愛貓打造一個堅固且充滿現代感的秘密基地。
✨ 作品亮點
- 仿生龜殼美學：片狀拼接，呈現規律的幾何美感，完美融入現代家居風格。
- 穩定幾何力學：採用足球（截角二十面體）變體結構，受力均勻且穩固，給主子最安全的依靠。
- 極致輕量化工程：全屋僅需約 750g 線材（不到一捲）即可完成，省料卻不失強度。
- 專為貓咪打造：組裝後尺寸約為 直徑 35cm、高 26cm，提供絕佳包裹感，適合 4.5kg 左右的成貓進駐。
- 模組化組裝樂趣：全屋僅由 3 種零件（共 25 片） 構成，使用 2.5mm 寬的小束線帶固定，結構簡單容易組裝，享受親手打造寵物家具的成就感！
🛠️ 列印與組裝指南
1. 零件清單 (合計 25 片)
- 六邊形 ：14 片
- 五邊形 ：6 片
- 四邊形 ：5 片
2. 建議切片設定
- 材質建議：推薦 PETG（具備更好的韌性與耐溫性）。
- 層高 (Layer Height)：0.2mm - 0.28mm（使用 0.28mm 可大幅縮短列印時間）。
- 填充 (Infill)：15% 網狀填充即可，幾何結構本身已提供足夠強度。
- 支撐 (Support)：無支撐。
3. 組裝工具與技巧
- 請準備一包 2.5mm 寬的束線帶。
- 依照結構孔洞對齊後束緊即可。
- ⚠️ 安全提醒：組裝完成後，請務必將束線帶多餘部分剪平，保護貓咪安全。
❤️ 結語
如果您也著迷於數學幾何與實用設計的結合，這絕對是您 3D 列印清單中不可錯過的一項挑戰！這不僅是給貓咪的禮物，更是展現 Maker 精神的作品。
如果您喜歡這個設計，請幫我點個贊 (Boost) 並收藏！ 期待在評論區看到您家主子「入厝」後的超萌照片分享！📸
💡 Design Overview
This is more than just a pet house—it’s a piece of geometric art for your living room! Inspired by the structural integrity of a Truncated Icosahedron (Soccer Ball geometry), this design achieves extreme lightweighting while maintaining incredible strength. Give your feline friend a sturdy, modern, and cozy secret base.
✨ Key Features
- 🐢 Bionic Tortoise Shell Aesthetics: The unique panelized assembly creates a rhythmic, natural geometric pattern that seamlessly blends into any modern home decor.
- ⚽ Structural Engineering: Utilizing a variation of the soccer ball structure, the load is distributed evenly across the dome, ensuring a safe and stable shelter for your cat.
- 🪶 Ultra-Lightweight Design: The entire structure requires only about 750g of filament (less than one spool), making it a highly material-efficient build without sacrificing durability.
- 🏠 Tailored for Cats: With an assembled size of approximately 35cm (Diameter) x 26cm (Height), it provides a perfect sense of enclosure for adult cats around 4.5kg.
- 🧩 Modular Assembly Fun: Composed of only 3 types of parts (25 pieces total). Simply secure them with 2.5mm cable ties. It’s easy to build and offers the immense satisfaction of handcrafting your own pet furniture!
🛠️ Printing & Assembly Guide
1. Parts List (Total: 25 pcs)
- Hexagons: 14 pcs
- Pentagons: 6 pcs
- Quadrilaterals: 5 pcs
2. Recommended Slicer Settings
- Material: PETG is highly recommended for its superior toughness and temperature resistance.
- Layer Height: 0.2mm - 0.28mm (Using 0.28mm significantly reduces printing time).
- Infill: 15% (Grid or Gyroid). The geometric structure provides inherent strength.
- Supports: None. Designed for easy printing without support material.
3. Assembly Tools & Tips
- Prepare a pack of 2.5mm wide Cable Ties.
- Align the pre-designed holes and cinch them tight.
- ⚠️ Safety Note: After assembly, please ensure all excess cable tie ends are trimmed flush and smoothed to prevent any scratches to your cat.
❤️ Closing Thoughts
If you are fascinated by the intersection of mathematical beauty and functional design, this project is a must-add to your 3D printing queue! It’s not just a gift for your pet, but a showcase of the Maker spirit.
If you love this design, please give it a Boost and add it to your collections! I can't wait to see photos of your furry masters moving into their new home in the comments! 📸
Mr.POPO
