Customizable Place Card Name Plate

Create elegant, customizable wedding place cards in seconds.

This parametric model lets you generate a cursive name plate with a built-in mounting peg, designed to slide into a track or stand upright for table settings, escort cards, or event decor.

Perfect for weddings, bridal showers, parties, or any event where you want personalized name tags with a clean, modern look.

 

Your guests can use it to hold photos or cards after the event! 

🛠️ How to Use

1. Enter the Name

Type your desired name into the name_text field.

Each name is generated instantly as a script-style nameplate.

2. Adjust the Size

Use font_size to scale the name:

• Smaller for tight tables
• Larger for more prominent display

3. Position the Mounting Peg

Use:

• peg_x → move left/right
• peg_y → move up/down

💡 Tip:
Position the peg under the lowest letter (like g, j, y) for the best balance and a clean “floating” look.

4. Adjust the Drop Length

Use peg_stem_length to control how far the peg extends downward.

• Shorter = sits closer to the surface
• Longer = deeper engagement in your track or holder

5. Enable or Adjust the Connector (Optional)

If letters are not fully connected, use the baseline:

• use_baseline → turn on/off
• baseline_height → thickness of the connector
• baseline_y → vertical placement

💡 Tip:
A small value (~1 mm) is usually enough to connect letters without being visible.

6. Adjust Thickness (Optional)

• mount_thickness → thickness of peg + baseline
• text_extra_height → how much taller the text is than the base

This creates a subtle raised lettering effect.

🖨️ Printing Tips

• No supports needed
• Print flat on the build plate
• 0.2 mm layer height works great
• Use a contrasting color for a premium look

💡 Use Ideas

• Wedding place cards
• Escort cards
• Table settings
• Party name tags
• Event decor

Boost MeIf you or Fiancé love this, give me a boost!