March 30, 2026
Description
This is my Minecraft inspired Two-tailed fox holding a lamp. It works with tea lights which you can screw in from the bottom using the printed cap. Fits tealight up to ~40 mm.
Fox Head
Fox Body
Fox Tails
Lamp Bottom
Lamp Top
Lamp Handle
Lamp Handle Rod
Lamp Handle Rod Cap
Lamp Panels
For Fox Assembly, kindly check bellow for the Assembly Guide PDF file.
Grab Lamp Bottom(the one with a circle hole and 4 brown pillars. Each pillar has 2 groves at 90 degree angles, you have to slide the yellow Lamp Panels into these grooves until they reach the bottom.
Lamp Top snaps onto the 4 pillar of Lamp Bottom.
Lamp Handle(shaped like a Y) fits into top hole of Lamp Top.
Lamp Handle Rod should be pushed through the hole on top of Lamp Handle, then through the mouth of Fox Head and finally throught the second hole of Lamp Handle. Use Lamp Handle Rod Cap to cap off the Rod on the other end.
Done!
Bambu Lab PLA Basic Pumpkin Orange
Bambu Lab PLA Basic White
Bambu Lab PLA Basic Black
Bambu Lab PLA Basic Dark Gray
Bambu Lab PLA Basic Sunflower Yellow
Bambu Lab PLA Basic Cocoa Brown
License:
Standard Digital File License
reaves
