April 2, 2026
Description
This is a curved track pack compatible with many 1:64 scale die cast cars and tracks. Includes 90, 45, and 22.5 degree curves. With the updated pack, you can now print tracks to be up to 12 lanes wide. The tracks that do not fit the a1 mini have been removed and a separate profile included for a1 minis that do not include the new sizes. The STLs have been uploaded as well if you want to try to get them to fit the A1 mini.
I have also added a 3 lane curve profile with curves that widen towards the center of the curve to allow longer than normal cars to go through where they previously would get stuck.
Some people have asked for me to get it up to 6 lanes and I may have gotten carried away and expanded to 12? Idk I like to have options….anyway, have fun!
Supports are now on build plate only. This makes them very easy to remove from the connector area. No more digging the sides out. If you experience issues with connector fitment. Toggle this option off and they will print like they used to.
Normal Series Curves - I'd suggest these curves to avoid car fitment issues during the turns. These can also be printed up to 12 lanes wide as a 45, 90, 135, 180, etc. The outer lanes are 22.5 degrees due to their size. Print 2 to create a 45, 4 to create a 90, etc.
Format - Initial Number = Lane position , Curve Radius, Curve name identifier.
1- 106.75mm Radius - Original 90
1- 106.75mm Radius - Original 45
2- 146.875mm Radius - Large 90
2- 146.875mm Radius - Large 45
3- 187mm Radius - XL 90
3- 187mm Radius - XL 45
4- 227.125mm Radius - 4th 45
5- 267.25mm Radius - 5th 45
6- 307.375mm Radius - 6th 45
7- 347.50mm Radius - 7th 45
8- 387.625mm Radius - 8th 22.5
9- 427.75mm Radius - 9th 22.5
10- 467.875mm Radius - 10th 22.5
11- 508mm Radius - 11th 22.5
12- 548.125mm Radius - 12th 22.5
Print 2 45 degree curves to create a 90, 4 to create a 180 etc.
Print 4 22.5 degree curves to create a 90, print 8 to create a 180 etc.
‘Mid’ Series Curves - These are not recommended due to issues with cars getting stuck - These are designed to be the same size curves but in a single lane format as my uploads of the ‘Shallow’ and ‘Middle’ Double lane curve and the ‘Shallow’ 3 Lane 90 curve. These are found in my Double and Triple Curve packs. I didn't want to leave the A1 Mini crowd out if they printed either of those double or triple 90s or for anyone who just wants more track sizes.
The inner 90 below is the inner curve to the original curve. I still include it but it can have issues with cars unless they are miniature.
Inner 90 - A 90 degree curve that fits on the inside of my original 90. Can be incompatible with cars
66.625 radius
License:
Standard Digital File License
Koaxke
