Panther Bookmark (HueForge)

No, you may NOT sell my work, alter it for commercial purposes, or distribute it on other platforms. I am a seller of my own work. When you do these things, it takes money out of my pocket and puts it into yours, when you did none of the work. I spent hours working on this and fine-tuning it. Please, be respectful of the licensing agreement you partake in when you download the file.

------------------------------------

Thank you for your interest in "Project Panther" !! 
One of my friends asked for a panther themed bookmark, so I made one for them, and decided to share it with you! I gave it some basic shading and blue eyes, but honestly you can change the blue eyes to whatever color you wish, since the last filament change for the eyes is on top of all the other layers.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Plate 1 Model is 133x200mm in size. Plate 1 is the full size un-cut original. Not good for bookmarks, but good for a desktop or wall.

The Plate 2 Model is a cut down version which is a more reasonable 102x200mm in efforts to fit it as a good size for a bookmark - however, still quite large. 
 

Plates 3 and 4 are a reflection of plate 1, but cut in half. Plate 3 is the left side of the face, and Plate 4 the right. 3 and 4 are each 66.7x200mm.

You may print at higher layer heights below the Base Thickness of 1.52mm
The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.38446mm

This print uses 4 unique filaments

    #000000 PLA+ Sunlu Black            Transmission Distance: 0.6
    #515b65 PLA ZIRO Dark Grey       Transmission Distance: 0.5
    #ddd7c7 PLA+ Esun Bone White  Transmission Distance: 5
    #65ecff   PLA+ eSun Light Blue     Transmission Distance: 3.7

Swap Instructions:
    Start with Black
    At layer #19 (1.6mm) swap to Dark Grey
    At layer #21 (1.76mm) swap to Bone White
    At layer #27 (2.24mm) swap to Light Blue for the rest.

------------------------------------
       Common Issues: 
------------------------------------
Help! My sliced plate looks all black!! 
Relax. Trust the process... 
Hit slice. Make sure the bar on the right has your filaments stacked to change at the layers marked above in text. 
Print.

The Prepare tab will always have the colors off from what will actually be printed when it comes to HueForge prints.