Ultimate Internal Wheel Clicker (Print in Place)

This wheel clicker fidget toy uses a super satisfying internal dual spring mechanism to achieve an ultra satisfying and tactile click. Being fully print-in-place, this toy can be pulled right of the build plate fully functional, removing the hassle that comes along with supports and external hardware. With a knurled grip on the sides and a pattern for grip in the middle, you can enjoy this fidget toy without the worry of it sliding out of your hands. The design of the Ultimate Internal Wheel Clicker was carefully perfected over many prototypes to be as satisfying as possible and super visually appealing. Taking only 6.8 grams and less than 28 minutes to print, the Ultimate Internal Wheel Clicker is the perfect fidget for anybody who likes a satisfying little clicker.

Boost MeIf you like this model, please consider boosting it! It helps out a ton :)MembershipWant to sell my 3D printed fidget toys? Become part of my Commercial License Membership program!

Printing Instructions:

1. Prepare the Print Bed
   • Clean the print bed thoroughly with isopropyl alcohol to ensure proper adhesion.
   • Additional adhesive for the print bed is highly recommended! I suggest using 3D-Lac spray or a glue stick.
      
2. Download the Print Profile
   • Send the pre-configured print profile to your Bambu Lab printer through the Bambu Handy app or Download and open the pre-configured print profile in Bambu Studio.
      
3. Select Your Printing Options
   • Choose your filament type and color.
   • Select your print bed type (e.g., textured or smooth).
   • Confirm your printer settings, ideally for a Bambu Lab printer.
      
4. Start Printing
   • Begin the print job. No supports are necessary.