Natural Rock Cave For Aquarium

📝 Description

Natural looking rock cave for shrimp and small fish.

• Top Hole: Lets air escape easily so it sinks effortlessly.
• Bottom Hole: Helps with water flow and easy substrate placement.

💡 Recommended Print Settings:

• Walls: 3 or 4
• Infill: 15%
• Support: Tree supports (Set Top Z Distance to 0.28 mm for easy removal).
• Bed Adhesion: Use Outer Brim and turn off the fan for the first 3-5 layers to keep supports stable.

Rinse in warm water before putting it in your tank!

NOTE:

If the print floats due to air trapped in the 15% infill, simply submerge it and tilt it underwater to let the air escape through the top vent. Alternatively, you can print it with 100% infill to make it naturally heavy, or use 0% infill and no top/bottom layers so water fills the inside completely.