Wizard of Oz HueForge

Wizard of Oz Hueforge print! :D 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

You can change the X and Y axis to be as large as you want. You must leave the Z axis

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #003b3b PLA BambuLab Basic Green  Transmission Distance: 2
    #3f8e43 PLA BambuLab Basic Mistletoe Green  Transmission Distance: 1
    #fce300 PLA BambuLab Basic Yellow  Transmission Distance: 6
    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #11 (0.96mm) swap to Green
    At layer #13 (1.12mm) swap to Mistletoe Green
    At layer #17 (1.44mm) swap to Yellow

Border Only Colors from here until the end.
    At layer #27 (2.24mm) swap to Black for the rest.