Overview
Meet the Aviator Bear, a charming and easy-to-print night light designed for everyone!
The best part? No expensive LED kits required. I designed this model specifically to work with a standard, low-cost Balloon LED (those small, round, battery-operated lights). It is the perfect budget-friendly project for your desk, shelf, or as a gift for kids.
Features
- Wireless & Portable: Since it uses a tiny battery LED, you can place it anywhere without worrying about cables.
- Optimized for Light: The internal cavity is designed to diffuse light beautifully through the fuselage and the bear.
- Easy Assembly: Just print, pop the LED inside, and watch it glow!
Print Instructions & Recommendations
- Material: I recommend using White PLA, Natural PETG, or Glow-in-the-Dark filament for the best light diffusion.
- Walls: Use 2 walls for a brighter glow.
- Infill: 0% to 5% is ideal. The lower the infill, the more the light will shine through the model.
- Supports: Some supports are needed for this model.
- Fuzzi Skin: I configured a fuzzy skin for the bear face, but I did not print with this mod, if you want to print without, just use the No Fuzzy Skin profile uploaded
Gabrielbrdc
![#0017 [Remix] X2 Delta P Duct [V2R2.2] for the MK3S(+) [New Flow Splitter] preview image](https://wsrv.3dprinterfiles.com/?url=https://media.printables.com/media/prints/155387/images/3720913_fbdbd996-a1de-4291-8b9e-a4c2554d6d73/thumbs/cover/320x240/jpg/mod2-and-3leds.jpg&w=640&h=640&output=webp&q=100&n=40&default=https://media.printables.com/media/prints/155387/images/3720913_fbdbd996-a1de-4291-8b9e-a4c2554d6d73/mod2-and-3leds.jpg "#0017 [Remix] X2 Delta P Duct [V2R2.2] for the MK3S(+) [New Flow Splitter] preview image")
