Chanel Tap to Pay wand

Boost MeBOOST Support my work and help make more. Thank You

Chanel tap to pay wand

App Printable

Please hit LIKE and give me a BOOST if you like this wand

 

The main profile is a split head where you print the two sides and glue them together, this one prints much faster and can yield a very nice finish if your filament and printer are good.

 

Single head print. This one takes a good bit longer to print and if you have had issues printing taller narrow things in the past I do not suggest. This will probably give you the best face finish possible and no gluing

 

There is also a single color print if you just want one color.

 

After all your printing is done make sure you have removed all of the supports

A trick to the gluing of the heads is to use a slower drying glue like E6000 and screw the stem to the head and throw a clamp or two on it

 

Then just slide you card in screw the stem and handle on and hit the town the right way!

 

My LV wand and many more can be found here

https://makerworld.com/en/collections/23368794-tap-to-pay-wands