Parametric Gridfinity Hex Bin with Honeycomb Walls & Magnet Support
A fully customizable Gridfinity-compatible storage bin with a striking honeycomb wall pattern. Configure grid size, height, hex pattern, and margins directly on MakerWorld – no code editing required.
Boost MeBoosting helps me afford my filament. I really appreciate all of your support!
Features:
- 🧩 Gridfinity Standard - Snaps into any Gridfinity baseplate with precision-fit feet.
- ⬡ Honeycomb Walls - Parametric hex cutouts on all four sides for style, grip, and ventilation.
- ✂️ Clip or Skip - Choose whether edge hexes are cleanly clipped at the wall boundary or omitted entirely.
- 🔍 Sliver Filter - Set a minimum visible hex size so tiny partial cutouts are automatically filled in.
- 🧲 Magnet Ready - Optional magnet holes in the feet for a secure hold on magnetic baseplates.
- 💍 Solid Rings - Add solid bands above and/or below the hex pattern for extra rigidity.
- ⚙️ Customizable Online - Adjust grid size, bin height, hex size, wire thickness, wall thickness, and margins on MakerWorld.
Default Setup:
- 2×1 grid (fits 2 Gridfinity units)
- 42 mm tall bin with 1.6 mm walls and 2.4 mm bottom
- 10 mm hex holes with 1.2 mm wire between them
- Magnet holes enabled
- Side clipping off, solid rings off
Printing Guidelines:
- Material: PLA or PETG recommended
- Layer Height: 0.2 mm or finer for clean hex edges
- Infill: 15–30% is usually enough
- Supports: Not needed
Intisy
