Tray Minimal – Optimized for Marble PLA

Minimal Tray – Optimized for Marble PLA

A simple and clean tray designed for everyday use. Perfect as a pocket organizer, desk accessory, or decorative piece.

This model is optimized for realistic FDM 3D printing, especially with marble PLA filaments, to achieve a premium stone-like appearance.

🔧 Recommended Print Settings:

• Layer height: 0.16 mm
• Nozzle: 0.4 mm (0.6 mm recommended for marble filaments)
• Walls: 3
• Infill: 15% (Gyroid)
• Temperature: 210°C nozzle / 55°C bed
• Cooling: 100% after first layer

⚠️ Note:
Marble filaments contain particles that may cause clogging with small nozzles. Use ≥0.4 mm nozzle for best results.

The model is designed to print easily with minimal supports and clean surfaces.

If you print it, feel free to share your result!

👉 If you print it, it's likely something that attracted you.

I'd like to ask you two favors: click "Finish printing" when it's finished, and upload a photo to show the result. If I make any mistakes, I'm happy to hear criticism. If you liked it, you can support me with a boost: every little bit helps me create new models and grow on MakerWorld! Thanks :-)