This model is a new casing system for the TPU Feed Assist Module kit proposed by Bambu Lab.
I was not sold on the very basic design of the casing proposed by Bambu Lab, so I decided to design my own.
I am very happy with the result, it worked flawlessly since I have received my kit so I decided to share it here.
The goals and specifications are :
a better look : I think this design is a bit more refined than the original proposal
a better feel : I made the activation buttons flush with the top surface and a bit larger too. This way you will not damage the electronic switch if the module fall on the buttons side, and it feels really better on the fingers too
quick release of the PTFE tubes!!! Like other models I propose, I have added quick release buttons to ease the connection and removal of the PTFE tubes. Once again, the buttons also help to protect the internal parts by covering them. The output button can slide which will not interfere with the internal mechanism
a bigger led cover : the really tiny part of the original design was a bit hard to insert with big fingers!
a dust cover is provided, it sits flush with the top surface
compatible with the original mouting systems : the casing is compatible with the brackets already existing
no other part or hardware needed : you will re-use the components provided by Bambu
The building process is very similar to the original, so you can re-use the instructions from the Wiki to build it. However I have made the assembly guide you will find at the bottom of the page with updated pictures.
I hope you will enjoy it too, please send me a message if you find some improvements can be made!
dedge
