Fidget Toy Sliding Tile 15 Puzzle Game DRAGON

After making the standard 15 puzzle, I decided to create a more original version that is also harder to solve.

The basic mechanism is the classic sliding tile one, but the dragon artwork and its small details make it more challenging than the usual numbered 15 puzzle. To make it a little easier, I decided to extend the design onto the frame as well, so there is a visual reference to help place the most important pieces.

 

Boost MeIf you liked the project and want to support my work, a Boost is always greatly appreciated.

 

The object is very easy to print because all the tiles and the frame come out already assembled. The only separate part is a bottom closing cap, which can simply be snapped into place. Since while playing you naturally tend to press downward, I still recommend securing it with a small amount of glue: this makes the overall experience more satisfying.

 

For the colors, I chose brown and orange: classic but vibrant. They are very easy to change: just set the base filament for the main pieces, then assign the filament for the SVG design to the modifier. In theory, it could be used with any SVG design, but this project does not allow sharing or redistribution. If you would like to customize it legally, you can support me on my BuyMeACoffee page.

 

⚠️ INSTRUCTIONS:

1. The textured PEI plate is strongly recommended.
2. Let the plate cool down for 10–15 minutes before removing the print.
3. Once cool, the part releases easily without forcing — which could accidentally push tiles out of their slots.
4. Put the box with tiles face down on the table, apply a thin line of glue along the inner edge of the frame (keep the glue away from the tiles!)
5. Align the base cap on top of the bottom frame, with textured face down, and snap it into the frame with firm pressure

Please do not rescale — tolerances are tuned for this exact size. If you'd like a smaller version, let me know in the comments!