Modular World Cup Noisemaker | Modular meets Loud

Are you ready for the World Cup? 🏆 With this 3D-printed flag-shaped ratchet, you are perfectly equipped for the fan zone, public viewing, or your private backyard soccer party!

Whether you want to loudly cheer your team to victory or just annoy the neighbors a little bit (use at your own risk! 🤭) – this gadget delivers the perfect, unmistakable sound for every game.

Highlights:

• 🎨"Make Your Own": Ready to print right away! Missing your team? No problem! Just use the included "Make Your Own" file and easily customize the colors to your liking.

   

• 🔄 Genius Feature – Interchangeable Flag: Did your favorite team unexpectedly get knocked out? No problem (and no tears)! The flag is super easy to swap. Just attach the colors of your backup team and you are instantly ready to keep partying!

   

• 🔩 Rock-Solid Screw Cap: The flag is secured by a threaded ball at the top. This allows you to cheer and rattle wildly without any parts flying off. 

   

• 🔊 Loud: The solid mechanism is designed to create a massive atmosphere and support your team loud and clear.

⚠️ Important: Before assembly (Freeing the reed)! To get the full, loud sound from your noisemaker, the built-in "reed" (the spring/clicker inside the flag) needs to be released once after printing. It is easiest to do this before assembling the parts:

• Method 1 (Pressing): Simply press firmly into the middle of the reed until it snaps free from the edges. (See GIF)

• Method 2 (Cutting): Carefully trace around the gap of the reed once with a craft knife/scalpel, then press it to release. (See GIF)

   

🛠️ Easy Assembly (No glue required!): The model is well-designed and can be assembled in seconds. Once the reed in the flag springs freely, just follow these steps:

1. Prepare the base: Take the handle and slide on a washer (Important: The square must face upwards), followed by the first sleeve.

    

2. Flag & Gear: Insert the gear into the recess in the middle of the flag and slide them together onto the handle.

    

3. Top spacers: Slide the second sleeve onto the axis from above. Then add the second washer (Important: The square must face downwards towards the flag).

    

4. Secure: Finally, screw the ball onto the thread at the top to lock everything in place.

Let the games begin! Have fun printing, cheering, and celebrating! 🎉