Easter Font Custom Pencil Topper Generator

With this fully custom coded generator you can make your very own pencil toppers with a cute easter font font just like the ones in the photos! making them ready to slide onto your very own pencil or pens. The design can be fully customized easily by clicking the green “CUSTOMIZE” button on the listing, once the customizer loads you can freely change the word to generate your own custom pencil topper!

Example Pencil Toppers Created with this Generator

To Customize!

1. click on the green “CUSTOMIZE” button found in the model listing

2. Once you see the popup just click on the green “CUSTOMIZE” button again 

    

3.  From there you will be put into Bambus “Parametric Model Maker” and on the left you will see the following options:

    

   CUSTOMIZER

   1. Text 

      • Name Text - The word or text you would like your pencil topper to have

         

   2. Topper Settings
      • Text Thickness - The thickness of the text/pencil topper
      • Text Scale - The size of the text
      • Plate Offset  - The size of the outer perimeter parts of the model
      • Pencil Hole Diameter - The diameter of the hole that runs through the pencil topper
      • Cylinder Outer Thickness - The thickness of the outer part of the cylinder that cuts through the pencil
      • Cylinder Extra Length - The length of the cylinder cutout, you may need to increase this if your text is long to ensure that your pencil topper has a hole going through it's entire length
      • Hole y offset -  the y axis location of the cylinder hole
      • Hole x offset - the x axis location of the cylinder hole

Things To Keep In Mind

Default Filaments: Above you will find the filaments I recommend in order to get your print looking exactly like mine from the photos.

Slicer Wall Generator: Depending on the size you decide to print this model at, some of the lines may be thin, due to this I would recommend that if you're printing a keychain on the smaller side make sure to change the wall generator from Classic to Arachne in order to ensure that those thin walls are printed properly.

Default values: The Default settings are what I recommend for a standard size pencil topper However feel free to play around with them if you want a different size or thickness, it's completely up to you!

If you have any issues with the customizer or have any feedback on how to make this generator better, please leave a comment below! I'm always open to new ideas and appreciate the feedback.

If you like this custom generator Try My Other ones! I'm sure you'll one you'll love!

Version History

v1.0 - Initial Release - Current Release