Avalon Q Ventilation Kit - V1

This is a ventilation kit designed for the Canaan Avalon Q home miner. 

The idea is to allow you to connect a ventilation hose to either vent hot air out, draw cold air in, or—why not both?

This also works great without a hose, as it provides a more 'focused' airflow for both intake and exhaust !

Installation & Setup.

Step 1: Turn your Avalon Q upside down so the power cable is facing the floor. This places the PSU at the bottom.

Step 2: Choose the model that fits your needs. I’ve included different versions low profile or slightly higher, large or small so you can pick whatever suits your setup best!

Important Note.

You will need to apply some double-sided tape to the "now" top (bottom :D ) of the miner. Without it, the weight of the hose and the plastic parts might cause the kit to slide off.

This method requires no screws and involves no risk of voiding your warranty. Everything is mounted externally, making it completely safe to use with your miner

 I’m looking into integrated mounting solutions for future versions, but for now, this is the most reliable method.

Feedback & Development

This is currently Version 1 (V1). I’ve been using this setup myself for quite a while now and it works great! I’m sharing this primarily to see if there is enough interest from the community before I invest more time into further refinements.

Let’s develop this further together! 

If you have suggestions or feedback, please leave a comment.