石中剑

这款带磁石的版本还能当作解压小玩具。正插时磁铁会牢牢吸住，反插则会自动弹出一部分，可反复按压把玩。

打印时我已设置好暂停点位，暂停后放入磁石，再继续打印即可。

注意：KX 喷头含有铁质，继续打印时磁铁有可能被喷头吸起移位。为避免这种情况，放入磁铁后建议用胶水固定一下再继续打印。我虽然没涂胶水也成功了，但为稳妥起见，还是强烈推荐粘牢。所有磁铁统一朝一个方向放置即可。

This magnetic version doubles as a stress-relief toy.Inserted one way, it locks firmly with magnets; flipped the other way, it pops out slightly. You can press it repeatedly for fun.

I have already set pause points in the print. When the print pauses, insert the magnets, then resume printing.Note: The KX print head contains ferrous metal, so there is a chance the magnet will be pulled out when printing resumes.To prevent this, secure the magnet with a little glue after inserting it before continuing.I succeeded without glue, but for safety, gluing is highly recommended.Place all magnets facing the same direction.