Samsung SmartTag2 Bike Mount – Discreet Holder

Description:
This mount is designed to securely and discreetly attach a Samsung SmartTag2 to your bicycle. It provides a simple and effective way to add tracking functionality for theft protection without affecting the bike’s appearance.

The design focuses on a tight, stable fit to prevent movement or rattling, even on rough terrain. At the same time, the SmartTag2 remains accessible for battery replacement and maintenance.

The mount is designed to be installed under the saddle and is compatible with saddles such as the ACID Nuance Lite (e.g., on the Cube Nuroad Race). Its compact form factor helps keep the tracker hidden, adding an extra layer of security.

Additional Hardware Required:

• 3× M4 screws (minimum length: 12 mm)
• 3× M4 nuts (nylon lock nuts recommended)
• 3× M4 washers (recommended for better load distribution)

Assembly Instructions:
The model consists of four parts. Only two of them need to be glued together—use a strong adhesive such as super glue (cyanoacrylate). Make sure they are properly aligned before the glue sets.

Press the M4 nuts carefully into their designated slots. A tight fit is intended, so apply even pressure to avoid damaging the print.

Once assembled:

• Place the Samsung SmartTag2 inside the holder
• Align all parts and secure them using the 3 M4 screws
• The mount can then be attached to your bicycle

Access / Maintenance:
To remove the SmartTag2, simply loosen and remove the three screws.