Terraclaw - Winged Articulated Dragon

⚠️Additional print bed adhesive (e.g., 3D-Lac, hairspray for PEI, or glue stick for the Cool Plate) is strongly recommended, and the bed should be cleaned with alcohol or soap before each print to ensure optimal adhesion and high-quality results ⚠️

Inspired by the amazing world of Wings of Fire. All character rights belong to Tui T. Sutherland and Scholastic. This is a non-commercial fan-made tribute.

A powerful and expressive articulated dragon designed with a bold, grounded character. With its strong stance, detailed scales, and wide wings, this model combines visual impact with functional print-in-place engineering.
 

The design is  print-in-place - Only the lower jaw needs to be carefully pressed into the upper jaw after printing.
 

Print Information:

• Includes Multicolor and Singlecolor print profiles
  Each version also comes in a 77.5% scale, ideal for the Bambu Lab A1 Mini

⚠️ Important Notes:

• The Multicolor version involves many color changes
• Not recommended for printers with a single nozzle, as it will significantly increase print time and material waste
• Supports must remain enabled (Required to properly print the upper jaw)
• Ensure good bed adhesion for best results (especially for smaller contact points)
   

Assembly:

• Remove the support structure from the upper jaw
• Carefully insert the lower jaw into the upper jaw
• No glue or additional parts required