Container Mod Top Cover for Snapmaker U1

I wanted a simple cover for the U1.

Warning: Lid can hold in to much heat for softer materials like PLA.  I noticed issues when the chamber indicator rises above 38c.

Walmart: Sterilite 58 Quart Medium Storage Bin, Clear Plastic Storage Container with Snap-On Lid, White 

https://www.walmart.com/ip/Sterilite-58-Quart-Storage-Box-Clear-Plastic-Storage-Bin-with-Snap-on-Lid-White/8867870056?classType=VARIANT&athbdg=L1103&sid=642ed0ab-9ae0-46e3-959a-7e412f4754be

 

I designed TPU corner locators that fit into the existing holes in the machine.  You will need to remove the rubber insert first.  I found that 2, 1 in each front corner works perfectly and keeps the container lid locked in place.

The screw I used is a 2.6x6 self tapping screw, I had some from the Bambu machines, I lined up the lid on the machine, marked the center of each hole and drilled with a 1/8 drill.
https://a.co/d/01HrTrni
 

 

Boost MePlease boost if you like this model.