Boost MeIf you like this design, please boost it!
It's free for you and helps me save for a AMS ;)
It keeps me going making this stuff. Thanks!!
IKEA SKÅDIS Desk Stand – Top Support Tray (Screwless Wall Mount)
If you’re using your IKEA SKÅDIS pegboard on a desk with standalone feet, you might notice it gradually leaning forward as you add more weight.
This model is designed to fix exactly that.
🧩 How it works
- The support sits on top of the SKÅDIS board
- The distance from the wall to the back of the SKÅDIS board measures 36.5 mm
- It keeps the same distance from the wall as the bottom feet, preventing forward tilt
- The back is sized for 20mm double-sided tape for a clean and simple installation
- The extended top doubles as a handy tray for small accessories
- Add one of these on top in the middle of the board, or 1 on each corner.
U can add as many as you want.
🔗 Perfect combo (Recommended)
This model is designed to be used together with the SKÅDIS desk feet by MaxX_Power:
👉 https://makerworld.com/en/models/59302-skadis_stand_for_table#profileId-61348
Huge thanks to MaxX_Power for the original bottom stand design 🙌
Combined with these feet, this top support creates a stable SKÅDIS setup.
🛠️ Printing
- Material: PETG (but PLA should work just fine)
- Walls: 4
- Infill: 20% gyroid
- Layer height: 0.2mm
- No supports needed
- Print orientation: topside flat on the bed
- Clean the bed or add a brim if you have adhesion troubles
- This was printed on my A1 without any problems.
💡 Notes
- For heavier setups, use strong double-sided tape or mounting strips
- Designed for standard SKÅDIS thickness
If you want me to adjust the size or add screwholes, just send me a message.
I wil do my best do adjust the desing to your needs.
Brambo
