ESP32 CYD Stand for CryptoMinder & Other Projects

I designed this stand for my latest project, CryptoMinder on the Cheap Yellow Display (ESP32-2432S028). It uses 4 M3 x 6 screws to secure the screen and 2 M4 x 20 screws with 2 M4 nuts for the adjustable pivoting legs. The back panel installs using snap-fit tabs, with no screws required, and includes a built-in cutout for a 12mm x 8.5mm passive buzzer for alerts.

 

CryptoMinder is a standalone ESP32-powered display that lets you monitor your cryptocurrency balances in real time—no phone or computer needed. It connects to your wallet and price APIs to display balances, live pricing, and total value across multiple coins. Designed for simplicity and always-on use, it supports up to three wallets, a web dashboard, customizable panels (colors, order, refresh rates), alerts with sound, auto-dimming, persistent settings, and OTA updates.

 

If you are looking for a model without the adjustable legs. Check out my other design here.

 

The firmware and installation instructions can be found here:
https://mbruneau.com/cryptominder/

 

Assembly Instructions

1. Connect the Buzzer
   Connect your 12mm × 8.5mm passive buzzer to the CYD.
2. Mount the Display
   Insert the screen into the front piece and secure it using 4 × M3 x 6 screws.
3. Install the Back Plate
   Place the buzzer into the back plate, then press the back onto the front until it snaps into place.
4. Insert the Nuts
   Push the 2 × M4 nuts into the slots on the legs.
   The flat side of the nut should align with the slot.
   It may require a little force so the nuts stay securely in place.
5. Attach the Legs
   Align the legs with the back panel and secure them using 2 × M4 x 20 screws.
6. Install CryptoMinder (Optional)
   If you plan to run CryptoMinder, visit:
   https://mbruneau.com/cryptominder/
   to install the latest firmware.

Boost MeA boost always helps me to keep designing these stands for other devices!  Feel free to comment if you need one for a particular device