xBox Elite Controller Stand

This stand is made for the xBox Elite Series 2 controller.  

My sincere thanks go out to https://makerworld.com/en/@MennoB for providing feedback on the compatibility of this controller. 

The stand has deep indentations to allow for a good fit and stability. I added a groove in the middle of the base to save on filament. I also created a version of the base with a logo, so that it's always clear which controller goes into which dock. 

I removed the original logos so that my model would not infringe copyright law as well as the makerworld exclusive model license. 

Important: if you print the sleeves in PETG, you will most likely have to file down the notches on the controller base a little in order to make the sleeve fit. 

Available Sleeve designs (will be updated reguarly:)

• Original 

• Arc 

• StarWars 

• Quadro
  
• Angled Slats
  

Update: All logos are now  separate parts and can be colored easily using the color fill tool in bambu studio. 

The following single base models are also available:

• XBox One/S: https://makerworld.com/en/models/2309169-xbox-controller-stand#profileId-2520822
• XBox 360: https://makerworld.com/en/models/2425082-xbox-360-controller-stand#profileId-2659776
• Original Xbox: https://makerworld.com/en/models/2828997-original-xbox-controller-stand#profileId-3151808
• PS3: https://makerworld.com/en/models/2504451-controller-stand-for-ps3#profileId-2753546
• PS4: https://makerworld.com/en/models/2429222-controller-stand-for-ps4#profileId-2664671
• PS5: https://makerworld.com/en/models/2309147-ps5-controller-stand#profileId-2520796
• Switch Pro 1: https://makerworld.com/en/models/2429600-switch-pro-1-controller-stand#profileId-2665097
• Switch Pro 2: https://makerworld.com/en/models/2442152-switch-pro-2-controller-stand#profileId-2680071
• Meta Quest 3: https://makerworld.com/de/models/2396844-meta-quest-3-controller-stand#profileId-2626633
• 8Bitdo 64: https://makerworld.com/en/models/2514299-8bitdo-64-controller-stand#profileId-2765424
• Nintendo Joy-Con Grip available on Makerworld (https://makerworld.com/en/models/1864709-joycon-controller-grip?from=search#profileId-1994974) : https://makerworld.com/en/models/2542092-joycon-controller-grip-stand#profileId-2798856
• Gamesir Cyclone 2: https://makerworld.com/en/models/2728429-gamesir-cyclone-2-controller-stand#profileId-3023577
• Nintendo JoyCon Grip: https://makerworld.com/en/models/2728400-nintendo-joycon-controller-stand#profileId-3023544
• Steam (2015): (NOT COMPATIBLE with the standard base and sleeve, uses a slightly bigger base and sleeve due to the large size of the V1 controller) - https://makerworld.com/en/models/2769452-steam-controller-stand#profileId-3076025. Can not be mixed with my other bases
• Steam (2026): https://makerworld.com/en/models/2788119-steam-2026-controller-stand#profileId-3099811
• Thrustmaster ESwap Pro: https://makerworld.com/en/models/2807591-thrustmaster-controller-stand#profileId-3124408
• 8BitDo Pro 2: https://makerworld.com/en/models/2862935-8bitdo-pro-2-controller-stand#profileId-319520
• Nintendo PowerA: https://makerworld.com/en/models/2866966-nintendo-power-a-controller-stand#profileId-3200278

I also designed a dual, triple and quad stand if you have multiple controllers. This can be found here: https://makerworld.com/en/models/2309245-dual-controller-stand-for-xbox-and-ps5#profileId-2520916