Tiffany/Chucky's Bride Hueforge

Hi, I couldn't find a HueForge of Tiffany when asked so i created my own. 
Enjoy!

Project: tiffany.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.72mm
The Max allowed Thickness is 2.48mm and the Actual Thickness is 2.48mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #1c254c PLA BambuLab Matte Dark Blue  Transmission Distance: 1
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #8c9099 PLA PolyLite Grey  Transmission Distance: 1
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #13 (1.12mm) swap to Dark Blue
    At layer #15 (1.28mm) swap to Red
    At layer #20 (1.68mm) swap to Grey
    At layer #21 (1.76mm) swap to Jade White for the rest.

Add a pause at layer #21 and change over to the white.