Fujiyama Hueforge - Fujisan

Boost MeUn petit clic sur “Boost” et tu m’aides énormément — sans rien dépenser ! Merci pour le soutien ❤️
A simple click on “Boost”, helps me a lot — and it costs you nothing! Thanks for the support ❤️MembershipAvec le membership, tu peux vendre toutes mes impressions en toute liberté ! Un vrai coup de pouce pour mon travail ❤️ Merci ! With a membership, you're free to sell all my prints! It really supports my work ❤️ Thank you!

Project: Mont Fuji.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 235x235mm in size

    PLA BambuLab Basic Black  Transmission Distance: 0.6
    PLA BambuLab Basic Jade White  Transmission Distance: 5
    PLA BambuLab Basic Red  Transmission Distance: 4
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Jade White
    At layer #11 (0.96mm) swap to Black
    At layer #14 (1.2mm) swap to Red
    At layer #18 (1.52mm) swap to Jade White
    At layer #20 (1.68mm) swap to Black
    At layer #21 (1.76mm) swap to Jade White for the rest.

 

Pour le cadre en 235x235mm le lien ci-dessous / For the 235x235mm frame, click on the link below:

https://makerworld.com/fr/models/2458364-frame-235x235mm#profileId-2699216

 

Pour le cadre en 200x200mm le lien ci-dessous / For the 200x200mm frame, click on the link below:

https://makerworld.com/fr/models/2458286-frame-200x200mm#profileId-2699108