Eurobox Clips for 20x20 Aluminium Extrusion Drawer

Very simple Clips to hold down Euroboxes in drawers or shelfs made out of 20x20mm Aluminium extrusions.

You will need the appropriate M4 T-Nuts and M4x10mm bolts.

Print with 0.20mm layer, 3 walls, 15% infill

PLA holds up fine, ABS is preferred. 

I would not recommend PETG, although tough, they snap unpredictably. 

Print orientation is on one of the sides. I like to print with a brim to avoid print fails. 

Make sure your Boxes have a chamfered edge at the bottom, as shown in pictures.

Check out my other designs!